UK's Wayland Additive Brings Semiconductor Electron Beam Technology to Metal Additive Manufacturing
📰 News Source
This article was translated from a Chinese source.
Source URL not available
This article was translated from a Chinese source.
Source URL not available
Metal powder grades mentioned in this article — specs, live prices & verified suppliers
At Formnext 2026 (Hall 11.0, Booth A55), Continuum Powders unveiled Argos, its next-generation melt-based powder production platform. Argos combines cold-crucible plasma melting with inert gas atomization, featuring a melting power of over 0.5 MW and a designed daily output of more than 4 tons of metal powder, targeting the large-scale continuous production demands of additive manufacturing. The platform is equipped with the Max DP atomization die, a satellite-particle suppression system optimized through computational fluid dynamics, and automatic pouring technology. The first validated material is OptiPowder 718 nickel-based superalloy, which has already been certified for the HP Metal Jet S100. Argos will run in parallel with the existing Greyhound platform. CEO Jon Cozens says the system is aimed at securing qualified powder supply for high-demand alloys. Continuum uses recycled feedstock and green electricity, positioning itself around low-carbon, large-scale powder production. Grades such as Ni718 and titanium alloys, which involve long qualification cycles and high supply risk, will gain a second supply source, helping powder buyers diversify supply risk and strengthen their negotiating position.
2026-11-17Farsoon unveiled the large-format FS722M metal platform at Formnext 2026 (Hall 11.0, Booth E11). The system offers a build envelope of 720×420×650 mm, is equipped with eight 1000 W lasers, and reaches build rates of up to 1000 cm³/h (3D Printing Industry, November 17). The FS722M succeeds the FS721M series and makes previously optional features standard: a rectangular build area suited to long parts, a 650 mm build height that supports tall parts and vertical nesting, high-precision digital optics, multi-zone gas flow, real-time monitoring of laser power, gas flow and chamber temperature, and an interlayer traceability camera. Its CAMS (Continuous Additive Manufacturing Solution) configuration uses a conveyor to move interchangeable build cassettes and connects to an external inert unpacking station, enabling fully closed-loop automated powder handling under inert conditions, from recovery and sieving to storage and refilling. Farsoon also displayed a support-free titanium alloy supercar exhaust printed part. The FS722M and the FS4X (4×2 kW) launched yesterday form a two-tier lineup of mid-to-large machines, both focused on volume continuous production. Eight-laser machines consume significantly more powder per unit than small- and medium-format systems, so Farsoon's growing installed base is a direct positive signal for titanium alloy, aluminum alloy and superalloy powder purchasing.
2026-11-17At Formnext 2026 (Hall 12.1, Booth D41), HP announced an expansion of its Metal Jet binder jetting material system: OptiPowder Ni718 nickel-based superalloy has passed certification for the HP Metal Jet S100, OptiPowder M247LC has entered the certification process, and HP is collaborating with GKN Powder Metallurgy to advance copper alloy printing (3DPrint.com, November 17 report). Ni718 was jointly certified by Continuum Powders and INDO-MIM, with printed parts achieving density above 98% and hardness of 74-79 HR15N; the copper printing effort targets data center thermal management applications, leveraging binder jetting's cost advantages for volume production of high-thermal-conductivity copper components. At the same event, HP also launched the IF 600HT industrial fused deposition modeling system, expanding its portfolio across multiple technology routes in parallel. The binder jetting route places different demands on powder sintering characteristics and batch consistency than conventional LPBF, meaning certification thresholds effectively become supply thresholds. The expansion of the certified BJ printing material list for Ni718 and copper opens new volume production supply channels for powder manufacturers that have already obtained or are applying for HP certification, while uncertified powder producers should begin benchmark testing as early as possible.
2026-11-17Follow us for metal powder pricing, news, and supplier insights — delivered daily.
Ready to source metal powders?
Tell us your requirements. We match you with verified suppliers within 24h.