Farsoon launches FS722M eight-laser metal platform: 720×420×650 mm with CAMS continuous production and closed-loop powder handling
📰 News Source
This article was translated from a Chinese source.
Source URL not available
This article was translated from a Chinese source.
Source URL not available
Metal powder grades mentioned in this article — specs, live prices & verified suppliers
At Formnext 2026 (Hall 11.0, Booth A55), Continuum Powders unveiled Argos, its next-generation melt-based powder production platform. Argos combines cold-crucible plasma melting with inert gas atomization, featuring a melting power of over 0.5 MW and a designed daily output of more than 4 tons of metal powder, targeting the large-scale continuous production demands of additive manufacturing. The platform is equipped with the Max DP atomization die, a satellite-particle suppression system optimized through computational fluid dynamics, and automatic pouring technology. The first validated material is OptiPowder 718 nickel-based superalloy, which has already been certified for the HP Metal Jet S100. Argos will run in parallel with the existing Greyhound platform. CEO Jon Cozens says the system is aimed at securing qualified powder supply for high-demand alloys. Continuum uses recycled feedstock and green electricity, positioning itself around low-carbon, large-scale powder production. Grades such as Ni718 and titanium alloys, which involve long qualification cycles and high supply risk, will gain a second supply source, helping powder buyers diversify supply risk and strengthen their negotiating position.
2026-11-17At Formnext 2026 (Hall 12.1, Booth D41), HP announced an expansion of its Metal Jet binder jetting material system: OptiPowder Ni718 nickel-based superalloy has passed certification for the HP Metal Jet S100, OptiPowder M247LC has entered the certification process, and HP is collaborating with GKN Powder Metallurgy to advance copper alloy printing (3DPrint.com, November 17 report). Ni718 was jointly certified by Continuum Powders and INDO-MIM, with printed parts achieving density above 98% and hardness of 74-79 HR15N; the copper printing effort targets data center thermal management applications, leveraging binder jetting's cost advantages for volume production of high-thermal-conductivity copper components. At the same event, HP also launched the IF 600HT industrial fused deposition modeling system, expanding its portfolio across multiple technology routes in parallel. The binder jetting route places different demands on powder sintering characteristics and batch consistency than conventional LPBF, meaning certification thresholds effectively become supply thresholds. The expansion of the certified BJ printing material list for Ni718 and copper opens new volume production supply channels for powder manufacturers that have already obtained or are applying for HP certification, while uncertified powder producers should begin benchmark testing as early as possible.
2026-11-17US digital manufacturing company VulcanForms and EOS jointly announced on November 17 that VulcanForms has placed an order for 200 EOS M4 ONYX metal additive systems plus supporting equipment, the largest single order in EOS's history. The machines will be deployed at the Devens, Massachusetts factory, and once installed the fleet will reach 235 units (3DPrint.com, November 17 report). Order background: on November 12 VulcanForms announced it had closed $500 million in financing (led by J.P. Morgan and Apollo funds, part of JPMorgan's Security and Resilience Initiative) to build three new factories (Plant 4 will be located in Massachusetts) and to invest in physical AI to boost automation, bringing its cumulative funding to more than $1 billion. The EOS M4 ONYX is equipped with six 400W lasers, a 450×450×400mm build envelope, and the RFS Pro filtration system. A single order of 200 machines signals that metal additive manufacturing has entered a factory-building phase of expansion, with installed density in North America rising sharply. A fleet of 235 M4 ONYX-class machines will consume enormous quantities of powder annually, creating clear incremental North American demand across EOS's qualified materials list (titanium, superalloy, and aluminum grades) and representing a major-customer-level opportunity for powder suppliers.
2026-11-17Follow us for metal powder pricing, news, and supplier insights — delivered daily.
Ready to source metal powders?
Tell us your requirements. We match you with verified suppliers within 24h.