JEOL Launches JAM-5200EBMPlus Electron Beam Metal 3D Printer with Multi-Dot Scanning and In-Situ BSE Monitoring
📰 News Source
This article was translated from a Chinese source.
Source URL not available
This article was translated from a Chinese source.
Source URL not available
Metal powder grades mentioned in this article — specs, live prices & verified suppliers
Eplus3D unveiled the EP-M550L production automated line on November 16, 2026, integrating up to 16 lasers within a standard 550 x 550 mm build envelope and pairing it with an end-to-end automated powder handling and build cylinder transfer system for high-volume industrial batch production. The system has a build volume of 550 x 550 x 600 mm and is offered in four configurations with 8, 9, 12, or 16 lasers. Single-laser power options are 500 W, 700 W, and 1000 W, with a maximum theoretical build rate of 560 cm3/h. Its high-density multi-laser layout achieves high throughput within a compact footprint without relying on an enlarged build platform, while maintaining accuracy and process consistency across multi-laser configurations. The machine uses a modular, detachable build cylinder structure that allows printing and subsequent powder recovery to be managed independently, continuing the automated architecture of the EP-M300L. Applications cover aerospace, molds and tooling, 3C electronics, and precision manufacturing. The announcement explicitly lists automated powder handling and build cylinder transfer as components of the production line. Powder recovery is decoupled from the printing process, forming a continuous production unit in which printing, material handling, and downstream operations work in coordination.
2026-11-16Holdson, based in West Yorkshire, UK, is selling electrochemical polishing equipment under the Electroform brand and also offers small-batch polishing services. Founded in 2023, the company began with a turbocharger project in collaboration with engine manufacturer Cummins, aimed at improving the surface finish of internal turbocharger surfaces. Holdson says metal additive manufacturing accounts for about 60% of its business, with aerospace making up the largest share; inquiries come mainly from engine manufacturers and their tier-one suppliers, and the most commonly involved materials are Inconel and titanium alloys. In terms of process, Holdson encloses a conventional polishing bath in a standalone unit. The electrolyte is primarily water-based salts with a small amount of additives, and the specific formulation depends on the material being processed. The workpiece serves as the anode, current flows through the electrolyte between the workpiece and a second electrode, and metal preferentially dissolves at the high points of rough surfaces. For a typical additive manufacturing part with an average surface roughness (Ra) of 10–15 µm, Holdson can reduce it to below 5 µm in about 20 minutes; longer cycles can bring some surfaces to about 1 µm Ra. Material removal depends on the starting surface condition and ranges from a few microns to about 300 µm. For internal channels as small as about 2 mm in diameter, whether the electrode can reach inside and whether the electrolyte can flow through the channel are just as critical as the dimensions on the drawing. Metal additive manufacturing allows engineers to print internal geometries that are difficult to access after forming, which is exactly where Holdson's electrochemical polishing process comes in. The company handles cast, formed and machined parts, and the demand for polishing internal channels created by additive manufacturing corresponds directly to the capabilities it built up in the Cummins turbocharger project.
2026-11-16Ganzhou Huaisheng Tungsten Industry's project for 500 tons per year of cemented carbide tungsten-based powder materials has completed filing for record, with a total investment of 30 million yuan. The project is located in Ganzhou and, once completed, will produce 500 tons per year of cemented carbide tungsten-based powder materials. The project's tungsten-based powder materials fall within the metal powder sector and are industry-related to the raw materials required for metal 3D printing.
2026-11-16Follow us for metal powder pricing, news, and supplier insights — delivered daily.
Ready to source metal powders?
Tell us your requirements. We match you with verified suppliers within 24h.