International

Beamit Completes Insolvency Restructuring and Installs Latest EOS Metal Printer, Signaling Return of European Metal AM Service Capacity

2026-09-17 · Impact score: 13

Italian metal additive manufacturing service provider Beamit has completed its insolvency restructuring (exited insolvency proceedings) after being taken over by Rainshow, and has installed the latest EOS metal printer as a milestone in its capacity recovery. Beamit is one of Europe's leading metal powder bed fusion contract manufacturers for the aerospace and energy sectors, and the completion of its restructuring means that European high-end metal AM printing service capacity is returning to the market. The newly installed EOS model on the equipment side reflects the service provider's reinvestment in powder bed equipment upgrades; Beamit previously renewed its NADCAP additive manufacturing certification (L-PBF process audit with zero critical findings). Buyers in need of European L-PBF printing services can re-evaluate Beamit's capacity availability; its equipment upgrades also indirectly confirm continued investment in powder bed processes for aerospace and energy contract manufacturing.

📰 News Source

This article was translated from a Chinese source.

Source URL not available

Show Chinese original

Beamit完成破产重整并装机EOS最新金属打印机，欧洲金属AM服务产能回归

意大利金属增材服务商Beamit在Rainshow接手后完成破产重整（insolvency程序退出），并安装EOS最新型号金属打印机，作为产能恢复的标志节点。Beamit是欧洲航空、能源领域主要的金属粉末床熔融代工服务商之一，其重整落地意味着欧洲高端金属AM打印服务产能回归市场。设备侧新装机的EOS新机型反映服务商对粉末床设备迭代的再投资；此前Beamit曾续签NADCAP增材制造认证（L-PBF工艺零关键问题审计）。需欧洲L-PBF打印服务的采购商可重新评估Beamit产能窗口；其设备更新也侧面印证粉末床工艺在航空能源代工环节的持续投入。

🧪 Related Material Grades

Metal powder grades mentioned in this article — specs, live prices & verified suppliers

316L Stainless Steel Powder

15-45 µm / 15-53 µm

→

17-4PH Stainless Steel Powder

15-45 µm / 15-53 µm

→

Ti-6Al-4V (Grade 5) Titanium Powder

15-45 µm / 15-53 µm / 45-105 µm

→

AlSi10Mg Aluminum Alloy Powder

15-45 µm / 20-63 µm

→

Inconel 718 Nickel Superalloy Powder

15-45 µm / 15-53 µm

→

18Ni300 Maraging Steel Powder

15-53 µm

→

Related News

Beam Shaping in LPBF of IN718: Top-Surface Morphology and Defect Mechanisms — Doubling Build Rate via Small Hatch Spacing and High Scan Speed Process Window

Robin Prudlik, Jonas Grünewald, Simon Sankaré, and Katrin Wudy from the Laser Additive Manufacturing team at the Technical University of Munich published a paper in Additive Manufacturing (October 2026 issue, DOI: 10.1016/j.addma.2026.105402) systematically investigating the effects of laser power, scan speed, and hatch spacing on the top-surface morphology and defect formation in IN718 processed by laser powder bed fusion (PBF-LB/M), comparing Gaussian and ring beam profiles. The study shows that surface tension-driven melt pool instability is the core factor limiting productivity, particularly at high scan speeds (≳1600 mm/s) and large hatch spacings (≳0.15 mm). Hatch spacing is the primary trigger of surface irregularity, acting through control of inter-track remelting and transverse melt pool confinement; scan speed determines the morphology type and characteristic wavelength. Increasing hatch spacing reduces inter-track overlap, suppresses remelting-induced planarization, and induces unstable surface features; increasing scan speed shrinks the melt pool size, driving the surface from continuous to discontinuous states. Using ISO 25178 areal roughness parameters and a regularized classification framework, process maps were constructed: a planar top surface is achieved only at small hatch spacings, independent of beam shape; however, the combination of small hatch spacing and high scan speed maintains a planar top surface while increasing build rate by more than twofold compared to typical existing processes. Value for powder buyers: This study provides a new process window for IN718 powder under beam-shaping processes that balances surface quality and productivity. The small hatch spacing and high scan speed strategy imposes higher demands on powder batch consistency—sphericity, particle size distribution, and flowability directly affect melt pool stability at high scan speeds. When purchasing, verify the supplier's batch data and quality traceability documentation.

2026-10-17

Guangdong Hengtai's RMB 3.837 Billion Titanium-Based New Materials Integrated Project Phase I Filed: 100,000 t/y Chloride-Process Titanium Dioxide + 25,000 t/y Titanium Sponge

The Phase I green titanium-based new materials integrated project of Guangdong Hengtai New Materials Co., Ltd. completed filing on October 16, 2026, with a total investment of RMB 3.837 billion. It involves building production lines for 100,000 t/y chloride-process titanium dioxide and 25,000 t/y titanium sponge, and is located in the West Zone of Maoming High-tech Industrial Development Zone. This is an upstream titanium raw material capacity expansion rather than a direct additive manufacturing event: titanium sponge is the most upstream feedstock for titanium alloy powders (TC4/TA15, etc.), and the integrated layout of chloride-process titanium dioxide and titanium sponge can dilute titanium raw material costs. The commissioning of 25,000 t/y of titanium sponge capacity will strengthen titanium raw material supply in South China, provide a cost anchor and supply assurance for downstream powder producers, and indirectly benefit the cost and delivery stability of titanium alloy powders. For powder buyers: upstream titanium sponge capacity expansion is a medium- to long-term bullish signal for titanium alloy powder prices; attention should be paid to the linkage between powder production capacity in South China and raw material procurement rhythms.

2026-10-16

Titomic Awarded $250,000 Contract by Bechtel BPMI: TKF Cold Spray Technology to Evaluate U.S. Navy Submarine Repair Materials

Titomic USA (ASX: TTT) announced on October 16 that it has been awarded a contract by Bechtel Plant Machinery, Inc. (BPMI) to evaluate and develop advanced material solutions supporting the U.S. Navy submarine industrial base, with an initial order valued at $250,000 (approximately AUD 361,000). The collaboration centers on Titomic's proprietary TKF™ (Titomic Kinetic Fusion) cold spray additive manufacturing technology, which uses solid-state metal powder deposition (without melting) to achieve high-performance coatings, repairs, and near-net-shape components with minimal heat-affected zones and preserved material properties. The two parties will jointly explore advanced repair materials and manufacturing processes for future U.S. Navy programs, including submarine repair. Titomic plans to further introduce the TKF cold spray process into broader defense applications such as rapid production, component repair, and advanced material development to enhance readiness and reduce lifecycle costs. The announcement was made from Huntsville, Alabama, USA. CEO Jim Simpson stated that the future belongs to companies that dare to challenge traditional manufacturing methods and co-develop entirely new capabilities. Previously in an exploratory collaboration phase, this contract marks a substantive advancement of the partnership. Value to powder buyers: ① The defense repair demand signal for spherical metal powders (titanium, aluminum, nickel-based, refractory metals, DED/cold spray feed-grade particle sizes) is strengthening; ② if the U.S. submarine industrial base repair material evaluation is successful, it will bring opportunities for supporting powder supply and qualification; ③ Titomic's deeper integration into the U.S. defense supply chain benefits long-term order expectations for its partner powder suppliers.

2026-10-16

📡 Get Daily Industry Updates

Follow on X Join Telegram

View all news