AMCM has introduced the M 4K 1.6 metal additive manufacturing system, featuring a 60% increase in build height over its predecessor and a build envelope of 450 x 450 x 1600 mm. The system was showcased at Formnext 2026. Conventional LPBF systems typically have build heights under 400 mm, and a 1.6-meter build height significantly expands the capability boundaries of metal powder bed fusion. A large build height places higher demands on powder spreading uniformity, layer consistency, and residual stress control, making it a key technical challenge on the equipment side. The system targets components with high length-to-diameter ratios, such as rocket structural parts, heat exchangers, and slender oil and gas components. Such parts previously could only be produced by segmented printing followed by welding or by switching to other processes; single-piece forming reduces welds and assembly steps and supports customized large complex-geometry solutions for aerospace customers. As large-format LPBF equipment scales up, powder consumption and alloy grade demand (heat-resistant alloys) for high-aspect-ratio structural parts will rise in parallel. Powder producers can proactively prepare particle size and flowability adaptations for the process window of large build formats.