Industry Conference & Exhibition Neutral

EPMA Annual Congress Renamed Euro AM/PM: Additive Manufacturing Papers Now Over Half of Submissions, Call for Papers for 2027 Florence Opens November 4

2026-11-04

The European Powder Metallurgy Association (EPMA) has announced that its annual congress, Euro PM, will be renamed Euro AM/PM starting in 2027. The official reason is that additive manufacturing papers now account for more than half of all submissions. The first Euro AM/PM 2027 will be held October 10-13, 2027, at Firenze Fiera in Florence, Italy, with a 3,000 sq m exhibition. Abstract submission opens November 4 and closes January 20, 2027. Topics cover powder production and characterization, beam-based and sintering-based AM, MIM/HIP/FAST, biomedical and aerospace applications, and more. The European powder metallurgy academic community has formally elevated additive manufacturing to a main axis on par with powder metallurgy. The shift in the focus of metal powder research has received organizational confirmation, with AM upgraded from a sub-direction to a parallel main track. Value for buyers: confirmation of AM's status at the academic organization level signals that European powder manufacturers will continue to increase AM R&D investment. Watch the technical roadmap signals from Euro AM/PM papers and exhibiting companies.

📰 News Source

This article was translated from a Chinese source.

Source URL not available

🧪 Related Material Grades

Metal powder grades mentioned in this article — specs, live prices & verified suppliers

316L Stainless Steel Powder

15-45 µm / 15-53 µm

→

17-4PH Stainless Steel Powder

15-45 µm / 15-53 µm

→

Ti-6Al-4V (Grade 5) Titanium Powder

15-45 µm / 15-53 µm / 45-105 µm

→

AlSi10Mg Aluminum Alloy Powder

15-45 µm / 20-63 µm

→

Inconel 718 Nickel Superalloy Powder

15-45 µm / 15-53 µm

→

18Ni300 Maraging Steel Powder

15-53 µm

→

Related News

Weekly Report #2645 | Titanium Alloy 3D Printing Nears Volume Production in Consumer Electronics; Copper-Based Green Laser Becomes New Battleground

Titanium alloy 3D printing is on the eve of volume production in the Apple supply chain: Lens Technology is building titanium middle-frame capacity across dual bases in Taizhou and Changsha, and analysts say titanium 3D printing will be a capital expenditure focus in the new Apple supply chain cycle from 2027 to 2028. Copper-based green laser has become a new battleground: Dongyi Additive filed for a 90 million yuan copper-based production line, Xihe green-laser copper achieved 99.95% density, and Hengchi reached 99.7%. Blue Origin's Northstar engine is 65% 3D printed, and Chuangrui Laser achieved full 3D-printed turbojet ignition. Yuding Additive plans an IPO to raise 1.802 billion yuan, and Beikuang New Materials broke ground on its 3.06 billion yuan Ninghuai base. On prices, tungsten bars rose 2.2% against the trend to lead gains, while cobalt fell 3.7% to lead declines.

2026-11-07

Blue Origin Unveils Northstar Booster Engine: Over 65% of Parts 3D Printed, Cost Cut to One-Quarter of BE-4

On November 5 at the UP.Summit conference (followed up by Ars Technica and other media on November 6), Blue Origin CEO Dave Limp unveiled Northstar, a new engine for the first stage of the New Glenn rocket. It follows the liquid oxygen/LNG oxygen-rich staged combustion and single-shaft turbopump architecture, and went from project approval to ignition testing in only 11 months. Key metrics: thrust of 715,000 pounds-force (versus 640,000 for BE-4), 30% lower mass, 50% fewer parts, manufacturing cost of about one-quarter of BE-4, and assembly of a single unit in under one day. More than 65% of components are produced through the company's in-house large-scale additive manufacturing, with part count halved by consolidating components through printing. The "printability rate" of commercial space engines has reached another level. The value of metal additive manufacturing is spreading from core components such as thrust chambers and injectors to full-engine structures at scale, and the logic for powder consumption and metal printing equipment demand in large engines is expanding in tandem, creating sustained pull for titanium alloy, superalloy, and copper alloy powders. Value for buyers: Volume production of Northstar will amplify orders for aerospace-grade titanium alloy and superalloy powders and large metal AM equipment. Watch Blue Origin's supplier system and spillover demand for printing services for similar engines.

2026-11-06

National Standard for Preparation Requirements of Material Data Sheets for Metal Additive Manufacturing Powder Bed Fusion Enters Public Comment Period: Adopts ISO/ASTM 52929:2025

As of November 6, the national standard project "Preparation Requirements for Material Data Sheets for Metal Additive Manufacturing Powder Bed Fusion" has entered the public comment period (ending December 6, on the National Public Service Platform for Standards Information), under the jurisdiction of the National Technical Committee 562 on Additive Manufacturing Standardization (TC562), drafted by Beihang University, China Machinery Research Institute of Standard Technology, and others, and adopting ISO/ASTM 52929:2025 with modifications. The standard systematically specifies the preparation content of powder bed fusion material data sheets, material property reporting requirements, boundary conditions for property measurement, and test data processing: a data sheet consists of "basic information" (boundary conditions such as equipment, feedstock, process parameters, shielding gas, powder spreading device, and post-processing) and a "numerical section" (mandatory reporting items such as chemical composition, hardness, yield strength, tensile strength, elongation after fracture, and relative density); tensile properties must be reported based on at least vertically oriented specimens, each property data point is coded in the format "A_B_C" (number of machines_number of build jobs_number of specimens), and the arithmetic mean, standard deviation, test method, and validity range must be reported. Material property data provided by powder suppliers to customers is moving from "company-chosen formats" toward a unified, comparable national standard framework, substantially raising requirements for the standardization and auditability of batch data; powder companies' capabilities in data sheet preparation and test reporting will become a new competitive threshold. Value for buyers: once the national standard is unified, comparability of powder property data improves, and purchasers' efficiency and reliability in comparing data across suppliers' grades increase; powder companies need to strengthen their capabilities in data sheet preparation and test reporting.

2026-11-06

📡 Get Daily Industry Updates

Follow on X Join Telegram

View all news