Drones, Rockets, and Smartphones Drive 40% Revenue Growth in Industrial 3D Printers, Desktop Market Shows Signs of Saturation

2026-10-16 · Impact score: 43

The global 3D printer hardware market rebounded in the second quarter. CONTEXT data shows overall revenue grew 31% year-over-year. Industrial-grade equipment revenue increased 40%, while entry-level grew 36%. Metal systems accounted for 75% of industrial revenue, with shipments up 36%. Drone, rocket, and smartphone production emerged as major new demand drivers. Aerospace and defense orders fueled metal printing growth. The entry-level market is showing signs of saturation. Industrial-grade has once again become the growth engine.

📰 News Source

This article was translated from a Chinese source.

Source URL not available

Show Chinese original

无人机、火箭和手机推动工业3D打印机收入增长40%，桌面市场显露饱和迹象

全球3D打印机硬件市场第二季度回暖。CONTEXT数据显示整体收入同比增长31%。工业级设备收入增长40%，入门级增长36%。金属系统占工业收入75%，出货量增36%。无人机、火箭和手机生产成为新需求主力。航空航天与国防订单推动金属打印增长。入门级市场显露饱和迹象。工业级重新成为增长引擎。

🧪 Related Material Grades

Metal powder grades mentioned in this article — specs, live prices & verified suppliers

316L Stainless Steel Powder

15-45 µm / 15-53 µm

→

17-4PH Stainless Steel Powder

15-45 µm / 15-53 µm

→

Ti-6Al-4V (Grade 5) Titanium Powder

15-45 µm / 15-53 µm / 45-105 µm

→

AlSi10Mg Aluminum Alloy Powder

15-45 µm / 20-63 µm

→

Inconel 718 Nickel Superalloy Powder

15-45 µm / 15-53 µm

→

18Ni300 Maraging Steel Powder

15-53 µm

→

Related News

Beam Shaping in LPBF of IN718: Top-Surface Morphology and Defect Mechanisms — Doubling Build Rate via Small Hatch Spacing and High Scan Speed Process Window

Robin Prudlik, Jonas Grünewald, Simon Sankaré, and Katrin Wudy from the Laser Additive Manufacturing team at the Technical University of Munich published a paper in Additive Manufacturing (October 2026 issue, DOI: 10.1016/j.addma.2026.105402) systematically investigating the effects of laser power, scan speed, and hatch spacing on the top-surface morphology and defect formation in IN718 processed by laser powder bed fusion (PBF-LB/M), comparing Gaussian and ring beam profiles. The study shows that surface tension-driven melt pool instability is the core factor limiting productivity, particularly at high scan speeds (≳1600 mm/s) and large hatch spacings (≳0.15 mm). Hatch spacing is the primary trigger of surface irregularity, acting through control of inter-track remelting and transverse melt pool confinement; scan speed determines the morphology type and characteristic wavelength. Increasing hatch spacing reduces inter-track overlap, suppresses remelting-induced planarization, and induces unstable surface features; increasing scan speed shrinks the melt pool size, driving the surface from continuous to discontinuous states. Using ISO 25178 areal roughness parameters and a regularized classification framework, process maps were constructed: a planar top surface is achieved only at small hatch spacings, independent of beam shape; however, the combination of small hatch spacing and high scan speed maintains a planar top surface while increasing build rate by more than twofold compared to typical existing processes. Value for powder buyers: This study provides a new process window for IN718 powder under beam-shaping processes that balances surface quality and productivity. The small hatch spacing and high scan speed strategy imposes higher demands on powder batch consistency—sphericity, particle size distribution, and flowability directly affect melt pool stability at high scan speeds. When purchasing, verify the supplier's batch data and quality traceability documentation.

2026-10-17

Titomic Awarded $250,000 Contract by Bechtel BPMI: TKF Cold Spray Technology to Evaluate U.S. Navy Submarine Repair Materials

Titomic USA (ASX: TTT) announced on October 16 that it has been awarded a contract by Bechtel Plant Machinery, Inc. (BPMI) to evaluate and develop advanced material solutions supporting the U.S. Navy submarine industrial base, with an initial order valued at $250,000 (approximately AUD 361,000). The collaboration centers on Titomic's proprietary TKF™ (Titomic Kinetic Fusion) cold spray additive manufacturing technology, which uses solid-state metal powder deposition (without melting) to achieve high-performance coatings, repairs, and near-net-shape components with minimal heat-affected zones and preserved material properties. The two parties will jointly explore advanced repair materials and manufacturing processes for future U.S. Navy programs, including submarine repair. Titomic plans to further introduce the TKF cold spray process into broader defense applications such as rapid production, component repair, and advanced material development to enhance readiness and reduce lifecycle costs. The announcement was made from Huntsville, Alabama, USA. CEO Jim Simpson stated that the future belongs to companies that dare to challenge traditional manufacturing methods and co-develop entirely new capabilities. Previously in an exploratory collaboration phase, this contract marks a substantive advancement of the partnership. Value to powder buyers: ① The defense repair demand signal for spherical metal powders (titanium, aluminum, nickel-based, refractory metals, DED/cold spray feed-grade particle sizes) is strengthening; ② if the U.S. submarine industrial base repair material evaluation is successful, it will bring opportunities for supporting powder supply and qualification; ③ Titomic's deeper integration into the U.S. defense supply chain benefits long-term order expectations for its partner powder suppliers.

2026-10-16

Rolls-Royce 2026 Innovation Award Goes to MIM Sinter Joining Research: A New Route for Forming Complex Inconel 713LC Parts

On October 16, the European Powder Metallurgy Association (EPMA) reported that a metal injection moulding (MIM) sinter joining study by Rolls-Royce Deutschland and Fraunhofer IFAM received the Rolls-Royce 2026 Innovation Award in the publication category. Conducted under the German aviation research programme LuFo KOMPAKT, the paper "A study on a method of sinter joining in the metal injection moulding process" was co-authored by Mikael Luoto, Enrico Daenicke, Ralf Müller and Thomas Hartwig (presented at Euro PM2024). The study validated a new process route: separately formed MIM green parts are solvent (acetone) debound, butted together with a bonding paste, and then integrated through sintering, enabling geometries that cannot be formed by conventional single-shot moulding. The test material was the low-carbon nickel-based superalloy Inconel 713LC, and three pastes were compared—a system-specific polymer paste, a standard polymer paste, and a filler-containing polymer paste. Mechanical testing showed that the tensile strength of joined parts was comparable to that of unjoined parent material (with a slight decrease in elongation), creep (stress-rupture) performance matched the parent material, and fatigue performance was somewhat reduced, with each of the three pastes showing different strengths. The team successfully produced a "shell" demonstrator that cannot be formed by conventional MIM, indicating the method's feasibility for volume production. Value for powder buyers: (1) sinter joining opens up multi-part assembled complex structures for MIM, favouring demand for superalloy MIM feedstocks such as Inconel 713LC (fine powder grades plus binder systems); (2) the adoption of MIM for assemblies such as turbochargers and small aviation parts will expand fine powder procurement scenarios, and suppliers can position ahead of time according to MIM particle size standards; (3) fatigue performance still needs improvement, so track Rolls-Royce's aviation part qualification progress and the pace of process scale-up.

2026-10-16

📡 Get Daily Industry Updates

Follow on X Join Telegram

View all news

Ready to source metal powders?

Tell us your requirements. We match you with verified suppliers within 24h.

Browse Products Get Matched