Technical Supplier Profile · High-Performance Alloy Powder New Materials. Haohong New Materials. High-purity nitrogen-gas-atomized aluminum-based alloy powders · Oxygen content publicly declared in three grades by particle size. 99.99% high-purity nitrogen · GB/T 3190-2020 · 3,000 tons annual capacity · Hunan New Materials Enterprise. 99.99% high-purity nitrogen. 3,000 tons annual capacity. ≤600 ppm minimum oxygen content. Sections: 01 Overview · 02 Capabilities · 03 Grades and Specifications · 04 Product Series · 05 Testing and Patents · 06 Applications. 01 Company Overview and Qualifications. An aluminum-based alloy powder supplier focused on high-purity nitrogen gas atomization. Hunan Haohong New Materials Technology Co., Ltd. was founded in August 2016, building on technology accumulated at the Chinese Academy of Sciences and more than a decade of production experience. It specializes in high-purity nitrogen gas atomization (99.99%) and is a domestic high-tech enterprise in gas atomization powder production. The site covers 20,010 square meters of land with 6,060 square meters of plant building, and hosts a production line for high-purity, low-oxygen metal alloy powders with an annual capacity of 3,000 tons. Guided by its business philosophy of technology first, efficiency, quality excellence and win-win cooperation, the company is committed to producing new alloy powder materials based on aluminum alloys (1xxx to 8xxx series and ZL grades), aluminum-based high-silicon alloys, copper-based alloys and zinc-based alloys, and can customize binary, ternary and multi-component metal alloy powders to customer requirements, providing high-quality metal alloy powder solutions for high-end manufacturing. Specialized and Sophisticated Little Giant Enterprise. National High-Tech Enterprise. Hunan New Materials Enterprise. Anticorrosion Engineering Research Center. 02 Core Capabilities. Production-line-level low-oxygen control · 3,000 tons annual capacity. The entire production line system, including tanks and piping, is pre-evacuated to -100 ppm and immediately filled with 99.99% high-purity nitrogen for circulating protective production. Metal alloy powders produced by this process have good sphericity, accurate chemical composition, low impurity content, low surface oxygen content and uniform particles, with stable and reliable product quality. Good sphericity. Low oxygen content. Uniform particle size. High tap density. No impurities. Accurate composition. Why low oxygen matters: elevated oxygen content in aluminum-based alloy powders leads to reduced flowability, lower density in printed parts and poorer wetting in brazing. Conventional atomized aluminum powders typically have oxygen content in the thousands of ppm, while all three oxygen-content grades of this product are kept within 1,500 ppm, with the coarse powder grade as low as ≤600 ppm.