Industry 政策支持 Positive

Xiong'an New Area Solicits 2026 Science and Technology Breakthrough Projects: Additive Manufacturing Key Technologies Designated as Priority Direction

2026-10-16 · Impact score: 55

On October 16, the Industry, Information Technology, Science and Technology Data Bureau of Xiong'an New Area, Hebei Province, issued the 'Notice on Soliciting 2026 Xiong'an New Area-Level Science and Technology Breakthrough Projects (New Materials and Biomanufacturing Fields),' in which research and application of key additive manufacturing technologies are listed as one of the priority directions. The breakthrough directions include: high-performance materials dedicated to additive manufacturing for large metal components, next-generation titanium alloy materials, integrated forming of complex components, and intelligent process control. Financial support for a single project in principle does not exceed RMB 3 million, the ratio of enterprise self-funding to fiscal funding shall be no less than 2:1, projects must be launched before December 2026, and the implementation period shall not exceed 2 years. For powder enterprises: project approval sends a signal for R&D and supply cooperation on high-performance metal powders for large metal components; attention should be paid to the application trends of AM enterprises and powder suppliers in Xiong'an and the Beijing-Tianjin-Hebei region.

📰 News Source

This article was translated from a Chinese source.

Source URL not available

Show Chinese original

雄安新区征集2026年度科技攻关项目：增材制造关键技术列为重点方向

河北雄安新区工信科技数据局10月16日发布《关于征集2026年度雄安新区本级科技攻关项目（新材料与生物制造领域）的通知》，增材制造关键技术研究与应用被列为重点方向之一。攻关方向包括：基于大型金属构件的增材制造专用高性能材料、新一代钛合金材料、复杂构件一体化成形、智能工艺过程控制。单个项目财政支持原则上不超过300万元，企业自筹与财政经费比例不低于2:1，项目须2026年12月前启动、执行周期不超过2年。对粉末企业：立项即释放大型金属构件用高性能金属粉末的研发与供应合作信号，可关注雄安及京津冀AM企业与粉末供应商的申报动向。

🧪 Related Material Grades

Metal powder grades mentioned in this article — specs, live prices & verified suppliers

Ti-6Al-4V (Grade 5) Titanium Powder

15-45 µm / 15-53 µm / 45-105 µm

→

Ti-6Al-4V ELI (Grade 23) Titanium Powder

15-45 µm / 15-53 µm

→

TA15 Titanium Alloy Powder

15-53 µm

→

Pure Titanium (CP-Ti) Powder

15-53 µm

→

Related News

Beam Shaping in LPBF of IN718: Top-Surface Morphology and Defect Mechanisms — Doubling Build Rate via Small Hatch Spacing and High Scan Speed Process Window

Robin Prudlik, Jonas Grünewald, Simon Sankaré, and Katrin Wudy from the Laser Additive Manufacturing team at the Technical University of Munich published a paper in Additive Manufacturing (October 2026 issue, DOI: 10.1016/j.addma.2026.105402) systematically investigating the effects of laser power, scan speed, and hatch spacing on the top-surface morphology and defect formation in IN718 processed by laser powder bed fusion (PBF-LB/M), comparing Gaussian and ring beam profiles. The study shows that surface tension-driven melt pool instability is the core factor limiting productivity, particularly at high scan speeds (≳1600 mm/s) and large hatch spacings (≳0.15 mm). Hatch spacing is the primary trigger of surface irregularity, acting through control of inter-track remelting and transverse melt pool confinement; scan speed determines the morphology type and characteristic wavelength. Increasing hatch spacing reduces inter-track overlap, suppresses remelting-induced planarization, and induces unstable surface features; increasing scan speed shrinks the melt pool size, driving the surface from continuous to discontinuous states. Using ISO 25178 areal roughness parameters and a regularized classification framework, process maps were constructed: a planar top surface is achieved only at small hatch spacings, independent of beam shape; however, the combination of small hatch spacing and high scan speed maintains a planar top surface while increasing build rate by more than twofold compared to typical existing processes. Value for powder buyers: This study provides a new process window for IN718 powder under beam-shaping processes that balances surface quality and productivity. The small hatch spacing and high scan speed strategy imposes higher demands on powder batch consistency—sphericity, particle size distribution, and flowability directly affect melt pool stability at high scan speeds. When purchasing, verify the supplier's batch data and quality traceability documentation.

2026-10-17

Guangdong Hengtai's RMB 3.837 Billion Titanium-Based New Materials Integrated Project Phase I Filed: 100,000 t/y Chloride-Process Titanium Dioxide + 25,000 t/y Titanium Sponge

The Phase I green titanium-based new materials integrated project of Guangdong Hengtai New Materials Co., Ltd. completed filing on October 16, 2026, with a total investment of RMB 3.837 billion. It involves building production lines for 100,000 t/y chloride-process titanium dioxide and 25,000 t/y titanium sponge, and is located in the West Zone of Maoming High-tech Industrial Development Zone. This is an upstream titanium raw material capacity expansion rather than a direct additive manufacturing event: titanium sponge is the most upstream feedstock for titanium alloy powders (TC4/TA15, etc.), and the integrated layout of chloride-process titanium dioxide and titanium sponge can dilute titanium raw material costs. The commissioning of 25,000 t/y of titanium sponge capacity will strengthen titanium raw material supply in South China, provide a cost anchor and supply assurance for downstream powder producers, and indirectly benefit the cost and delivery stability of titanium alloy powders. For powder buyers: upstream titanium sponge capacity expansion is a medium- to long-term bullish signal for titanium alloy powder prices; attention should be paid to the linkage between powder production capacity in South China and raw material procurement rhythms.

2026-10-16

Titomic Awarded $250,000 Contract by Bechtel BPMI: TKF Cold Spray Technology to Evaluate U.S. Navy Submarine Repair Materials

Titomic USA (ASX: TTT) announced on October 16 that it has been awarded a contract by Bechtel Plant Machinery, Inc. (BPMI) to evaluate and develop advanced material solutions supporting the U.S. Navy submarine industrial base, with an initial order valued at $250,000 (approximately AUD 361,000). The collaboration centers on Titomic's proprietary TKF™ (Titomic Kinetic Fusion) cold spray additive manufacturing technology, which uses solid-state metal powder deposition (without melting) to achieve high-performance coatings, repairs, and near-net-shape components with minimal heat-affected zones and preserved material properties. The two parties will jointly explore advanced repair materials and manufacturing processes for future U.S. Navy programs, including submarine repair. Titomic plans to further introduce the TKF cold spray process into broader defense applications such as rapid production, component repair, and advanced material development to enhance readiness and reduce lifecycle costs. The announcement was made from Huntsville, Alabama, USA. CEO Jim Simpson stated that the future belongs to companies that dare to challenge traditional manufacturing methods and co-develop entirely new capabilities. Previously in an exploratory collaboration phase, this contract marks a substantive advancement of the partnership. Value to powder buyers: ① The defense repair demand signal for spherical metal powders (titanium, aluminum, nickel-based, refractory metals, DED/cold spray feed-grade particle sizes) is strengthening; ② if the U.S. submarine industrial base repair material evaluation is successful, it will bring opportunities for supporting powder supply and qualification; ③ Titomic's deeper integration into the U.S. defense supply chain benefits long-term order expectations for its partner powder suppliers.

2026-10-16

📦 Related Products

AlSi(5-70) Aluminum-Silicon Alloy Powder for Additive Manufacturing

Aluminum Alloy

AlSi10Mg Aluminum Alloy Powder for Additive Manufacturing

Aluminum Alloy

6061 Aluminum Alloy Powder for Additive Manufacturing

Aluminum Alloy

2024 Aluminum Alloy Powder for Additive Manufacturing

Aluminum Alloy

📡 Get Daily Industry Updates

Follow on X Join Telegram

View all news